Threads on Ground Screw messed up

jamesondrums · 1080

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline jamesondrums

  • Jr. Member
  • **
    • Posts: 25
on: May 28, 2020, 02:39:16 PM
The ground screw that I got unfortunately will not thread. Is there a specific material that the screw has to be?  I will get a replacement at Home Depot if possible.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #1 on: May 28, 2020, 02:40:44 PM
Steel is a nice idea.  Home Depot should have a zinc plated 8-32 screw that will work well.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9659
    • Bottlehead
Reply #2 on: May 29, 2020, 06:26:42 AM
Are you sure you used the 8-32x3/8 screw supplied, and not the 8-32 self tapping screw? They look similar and the self tapping screw does not want to screw into a nut easily.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline jamesondrums

  • Jr. Member
  • **
    • Posts: 25
Reply #3 on: May 30, 2020, 03:53:46 AM
Yeah I triple checked that. It was just a small defect in the threads that completely stopped it from letting it thread into the nut.


Pages: 1   Go Up
« previous next »