Mainline 6.3V reading

Jimb0 · 1713

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Jimb0

  • Sr. Member
  • ****
    • Posts: 294
on: September 25, 2021, 11:23:30 AM
Hi PB. I just wanted to check if the 6.3v at the power supply is suppose to read around 51v? I have the old manual so it says 6.3v but I just looked at one of the recent posts here that it's suppose to be between 50v and 55v with the newer Mainline models?


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #1 on: September 25, 2021, 04:27:27 PM
The Mainline 1.1 uses the new Eros 2 power supply board, which biases up the 6.3V supply to +50V, so you'll see about 50V on one terminal and 56V on the other.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Jimb0

  • Sr. Member
  • ****
    • Posts: 294
Reply #2 on: September 25, 2021, 04:33:10 PM
Thanks PB! Those are the readings that I got


Pages: 1   Go Up
« previous next »