Tubes?

adeep42 · 2037

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline adeep42

  • Full Member
  • ***
    • Posts: 212
on: March 28, 2022, 12:25:12 PM
Hi Bottlehead headquarters,

With some assistance from Paul B. I've been really enjoying my Moreplay for about 24 hours. Ergo not really broken in, but the synergy with my Elekit TU-8600 is amazing. Just so musical. Really curious as to what what brand and variation of 6V6 you've provided. They just sound terrific.

Thanks,

Alan


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9657
    • Bottlehead
Reply #1 on: March 28, 2022, 01:42:00 PM
Enjoy them. They are Soviet surplus we (used to) get from Ukraine.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline adeep42

  • Full Member
  • ***
    • Posts: 212
Reply #2 on: March 29, 2022, 11:31:55 AM
One more reason to support the Ukrainian people. Hope their tube supply survives but most important that the country and it's people survive.


Offline MHP

  • Newbie
  • *
    • Posts: 3
Reply #3 on: April 08, 2022, 04:31:25 PM
I was finally able to register. I was wondering if anyone know if Ken-Rad 6F6G tubes are compatible in the Moreplay?


Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5833
Reply #4 on: April 08, 2022, 06:53:27 PM
6F6 draws too much heater current to use without changing the heater voltage dropping resistors.

There is a discussion of alternate tubes in this post:

https://forum.bottlehead.com/index.php?topic=12949.0

(There are more discussions of tube alternates in the sub-forum; this is just my initial post.)

Paul Joppa

Pages: 1   Go Up
« previous next »