News:
June 03, 2023, 11:58:16 PM
« previous next »
Pages: [1]   Go Down

Author Topic: Tubes?  (Read 704 times)

0 Members and 1 Guest are viewing this topic.

Offline adeep42

  • Full Member
  • ***
  • Posts: 205
Tubes?
« on: March 28, 2022, 12:25:12 PM »
Hi Bottlehead headquarters,

With some assistance from Paul B. I've been really enjoying my Moreplay for about 24 hours. Ergo not really broken in, but the synergy with my Elekit TU-8600 is amazing. Just so musical. Really curious as to what what brand and variation of 6V6 you've provided. They just sound terrific.

Thanks,

Alan
Logged

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
  • Posts: 9347
    • Bottlehead
Re: Tubes?
« Reply #1 on: March 28, 2022, 01:42:00 PM »
Enjoy them. They are Soviet surplus we (used to) get from Ukraine.
Logged
Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline adeep42

  • Full Member
  • ***
  • Posts: 205
Re: Tubes?
« Reply #2 on: March 29, 2022, 11:31:55 AM »
One more reason to support the Ukrainian people. Hope their tube supply survives but most important that the country and it's people survive.
Logged

Offline MHP

  • Newbie
  • *
  • Posts: 3
Re: Tubes?
« Reply #3 on: April 08, 2022, 04:31:25 PM »
I was finally able to register. I was wondering if anyone know if Ken-Rad 6F6G tubes are compatible in the Moreplay?
Logged

Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 5646
Re: Tubes?
« Reply #4 on: April 08, 2022, 06:53:27 PM »
6F6 draws too much heater current to use without changing the heater voltage dropping resistors.

There is a discussion of alternate tubes in this post:

https://forum.bottlehead.com/index.php?topic=12949.0

(There are more discussions of tube alternates in the sub-forum; this is just my initial post.)
Logged
Paul Joppa
Pages: [1]   Go Up
« previous next »