Plastic part on Power Transformer broken

revolverxz · 1520

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline revolverxz

  • Jr. Member
  • **
    • Posts: 18
on: April 11, 2022, 06:37:31 PM
The plastic part on the power transformer broke off on each side, I was wondering if the transformer would still work or if I need to get a new one. Here's an image of the transformer

https://imgur.com/a/nTlT5Ue


Offline kGlerup

  • Jr. Member
  • **
    • Posts: 26
Reply #1 on: April 11, 2022, 07:21:25 PM
It will work just fine.
How did you do that?!?


Offline revolverxz

  • Jr. Member
  • **
    • Posts: 18
Reply #2 on: April 11, 2022, 07:22:38 PM
Quote from: kGlerup on April 11, 2022, 07:21:25 PM
It will work just fine.
How did you do that?!?

It was like that when I received the kit.


Offline Deluk

  • Sr. Member
  • ****
    • Posts: 440
Reply #3 on: April 12, 2022, 01:02:47 AM
"Cosmetic". Reattach with super glue or epoxy.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19772
Reply #4 on: April 12, 2022, 04:55:59 AM
I wouldn't bother reattaching it, that bit of the bobbin doesn't serve much of a purpose after the transformer is manufactured.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline revolverxz

  • Jr. Member
  • **
    • Posts: 18
Reply #5 on: April 12, 2022, 12:35:43 PM
Thanks. Also, I lost one of the star lockwasher for the transformer. Is it better to not use them at all or can I just use 3 of them?


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19772
Reply #6 on: April 12, 2022, 01:59:58 PM
You can leave one off on one of the front screws of the transformer and it isn't the end of the world.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »