BeeTwoQuiet DC voltage [resolved]

RestoredSparda · 4740

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline RestoredSparda

  • Full Member
  • ***
    • Posts: 84
on: March 03, 2022, 11:28:10 AM
Good afternoon!

Just completed the C4S board install and was wondering if my voltages are close enough at terminals 1 and 11. Instead of 150VDC I am reading 159.8 VDC.

Thanks!
« Last Edit: March 03, 2022, 03:55:21 PM by Paul Birkeland »


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19751
Reply #1 on: March 03, 2022, 01:15:27 PM
That's nothing to worry about.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline RestoredSparda

  • Full Member
  • ***
    • Posts: 84
Reply #2 on: March 03, 2022, 01:28:35 PM
Sounds good. Thanks Paul. 👍


Offline PT

  • Jr. Member
  • **
    • Posts: 24
Reply #3 on: March 28, 2022, 09:28:08 AM
Same here, but a hefty 185V on the 1 and 11 after installing the C4S on a BeePre2
120V on the 6 and 16. 4 LED's up and bright.
Line voltage 234V;
Should and where can I troubleshoot?




Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19751
Reply #4 on: March 28, 2022, 09:30:16 AM
Quote from: PT on March 28, 2022, 09:28:08 AM
Line voltage 234V;
Should and where can I troubleshoot?
No troubleshooting is required.  If you're wired for 230V, you could move one wire and go to 240V wiring if you'd like.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline PT

  • Jr. Member
  • **
    • Posts: 24
Reply #5 on: March 28, 2022, 09:33:39 AM
Thanks!


Offline Roamconstant

  • Jr. Member
  • **
    • Posts: 23
Reply #6 on: January 23, 2023, 09:43:29 AM
Paul- I'm in the same boat.  Just finished installing C4S board. 
I read 168V on terminals 1 and 11.
Terminal 6 is 165V.  Terminal 16 is 111V. 

Permission to move on to the second part of the quiet upgrade? 


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19751
Reply #7 on: January 23, 2023, 10:28:46 AM
Yes, that is OK.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Roamconstant

  • Jr. Member
  • **
    • Posts: 23
Reply #8 on: January 23, 2023, 11:13:53 AM
Awesome.   Thanks as always. 


Pages: 1   Go Up
« previous next »