Keeping wandering fingers out of harm’s way

[Jameson]

Ages ago there was a thread about how best to babyproof the amp against curious children’s fingers. I can’t find it. I seem to recall the suggestion was a perforated board or a mesh of some sort but wanted to see if anyone had a solution that kept someone from reaching under the chassis and shocking themselves but still allowed for adequate airflow.

[Doc B.]

I would use a sheet of perforated aluminum screwed to the bottom of the base. It must have a drain wire attaching it to the chassis plate so that it has continuity with the safety ground.

[Jameson]

I would use a sheet of perforated aluminum screwed to the bottom of the base. It must have a drain wire attaching it to the chassis plate so that it has continuity with the safety ground.

Thanks, Doc. Just attached to any of the ground points is ok?

[Paul Birkeland]

This is where I get what I use:
https://www.customcargrills.com/Custom-Grill-Mesh.asp

[Doc B.]

Attach the drain wire from the bottom panel to the safety ground tab on the chassis panel.

[Jameson]

Thanks guys!