Failed voltage check, some LEDs not lighting up, tube no longer lighting up

Shackney1127 · 13664

« previous next »
Pages: 1 2   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9657
    • Bottlehead
Reply #15 on: September 12, 2023, 05:07:03 AM
It is possible that a wire has been nicked when the insulation was stripped and the nick turn into a break as the wire was worked. These will sometimes be under the insulation where they can't be seen and often cause intermittent behavior.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
Reply #16 on: September 12, 2023, 06:37:55 AM
I would send this in for repair. You can contact queen(at)bottlehead(dot)com and let her know that we have been working on this on the forum and I let you know you could send your kit in for repairs.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1 2   Go Up
« previous next »