Plate choke wires

joralieu · 5268

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline joralieu

  • Full Member
  • ***
    • Posts: 102
on: February 13, 2024, 03:58:55 PM
The insulation on the wires on one of my plate chokes is cracked and split were it exits the plate choke. Is this a problem? Doesn't look good to me. I will try to attach a photo.
Thanks
Joe


Offline Thermioniclife

  • Sr. Member
  • ****
    • Posts: 796
Reply #1 on: February 14, 2024, 03:56:01 AM
There is high voltage going through the choke. I wouldn't feel comfortable using that. You contact replacement parts at bottlehead.

Lee R.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19806
Reply #2 on: February 14, 2024, 04:46:13 AM
We can certainly replace that.  As an alternative, you can purchase this product and apply a dab of this compound to the cracked area and it will be an acceptable repair:
https://www.amazon.com/AmplifiedParts-Corona-Dope-2-oz/dp/B00E1QZ2SY/ref=sr_1_2?crid=3MKVPW4ED3IIW&keywords=corona+dope&qid=1707925518&sprefix=corona+dope%2Caps%2C148&sr=8-2

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »