BH-DAC buzz

RPMac · 13439

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline RPMac

  • Full Member
  • ***
    • Posts: 220
on: June 15, 2021, 10:52:53 AM
Listening to my system yesterday, the sound went to a buzz(maybe 120hz) no other sound. Traced it to the BH-DAC, unplugged and reset it, and the buzz went away. No problems since.
Have had several power outages recently.
Should I be worried?
Love my BH-DAC...don’t want to lose it.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19744
Reply #1 on: June 15, 2021, 11:00:29 AM
I wouldn't be too concerned, a hard reset every now and then isn't particularly abnormal.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline RPMac

  • Full Member
  • ***
    • Posts: 220
Reply #2 on: June 15, 2021, 12:28:03 PM
Thanks, Paul
I have had a few times I didn’t get any sound and had to unplug and reset. It was the buzz that had me worried.


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9656
    • Bottlehead
Reply #3 on: June 16, 2021, 07:31:44 AM
If it's a real gnarly buzz that's usually just the DAC setting the wrong sample rate for some reason. A reset should fix it.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline RPMac

  • Full Member
  • ***
    • Posts: 220
Reply #4 on: June 20, 2021, 03:47:22 AM
Now I have no sound, just 8s across the front.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19744
Reply #5 on: June 20, 2021, 07:19:28 AM
Did you end up with a DAC and no Bottlebatt?  If so send me an e-mail at pb(at)bottlehead(dot)com and we can get you sorted.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »