Amp compatability

Dnorris · 2067

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Dnorris

  • Jr. Member
  • **
    • Posts: 34
on: April 10, 2014, 12:39:04 PM
I'm currently building an Eros, but plan on a BeePre next. The amp I have to drive is an SET (845/211 tube) with a 150 Kohm input impedance, 50 watt (Single ended, not balanced), 1.0 Volt for full output. I see that given the BeePre specs it puts out plenty of voltage, would that amp seem to be a reasonable fit with the BeePre or am I missing something obvious. Thanks.

Dale Norris

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19751
Reply #1 on: April 11, 2014, 06:00:08 AM
That amp will be a good match for the BeePre.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Dnorris

  • Jr. Member
  • **
    • Posts: 34
Reply #2 on: April 11, 2014, 06:24:22 AM
Thank you, Paul. I thought so, but I wasn't sure about matching impedance, etc. Looking forward to adding some 300b flavor to my vinyl spinning. BeePre/BeeQuiet order on the way.

Dale Norris

Pages: 1   Go Up
« previous next »