Pre Build Question

Guy Boisvert · 1937

0 Members and 1 Guest are viewing this topic.

Offline Guy Boisvert

  • Full Member
  • ***
    • Posts: 56
on: March 16, 2014, 11:19:51 AM
I'm about to start the Eros kit and am wondering if I could install a "mini chassis"  to the rear of the wooden base. On that chassis, I would put the four RCA Jacks and the phono ground post. The mini chassis would, of course, be grounded/connected to the main chassis.

I would prefer to run my cabling to the rear.

Can't see why this would not work....but safer to ask.

Perhaps I should have posted this on the Eros board ? Anyway, that is my question, whether asked here or elsewhere.



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19587
Reply #1 on: March 16, 2014, 11:49:14 AM
You can build the Eros stock, then turn it around 180 degrees to obtain what you're looking for.

I wouldn't recommend running a bunch of cabling under the power transformer.  Shielding and grounding will also become complicated if you move the ground post.  (Especially moving it outside the amplifier chassis)

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Guy Boisvert

  • Full Member
  • ***
    • Posts: 56
Reply #2 on: March 16, 2014, 11:59:10 AM
Good advice ! I'm glad I asked.

Thanks Paul