Selector Switch Replacement

ptlud · 4374

0 Members and 1 Guest are viewing this topic.

Offline ptlud

  • Jr. Member
  • **
    • Posts: 33
on: February 13, 2015, 08:29:12 AM
My Stereomour selector switch has developed an anoying pop.  I am looking for recommendations for a good replacement/upgrade.  Does the switch need to be shorting or non-shorting?

By the way, the amp sounds great with 45 tubes.

Your assistance would be greatly appreciated.

Thanks,

Paul
« Last Edit: February 13, 2015, 09:15:06 AM by ptlud »

Paul

Stereomour 2A3
Modded Toshiba 3950 DVD Player + Schiit Uber Bifrost DAC
JVC A40 Turntable with AT95e + Schiit Mani Preamp
Klipsch KLF-20


Offline Natural Sound

  • Sr. Member
  • ****
    • Posts: 998
Reply #1 on: February 13, 2015, 10:07:26 AM
Hi Paul, I used a Goldpoint 4P-3T-1D in my Foreplay III. The input scheme is similar to the Stereomour. They aren't cheap at $72 but work well last a long time.
http://www.goldpt.com/selector.html



Offline ptlud

  • Jr. Member
  • **
    • Posts: 33
Reply #2 on: February 13, 2015, 10:12:21 AM
Thanks for the suggestion.  Is the switch shorting or non-shorting?

Paul

Stereomour 2A3
Modded Toshiba 3950 DVD Player + Schiit Uber Bifrost DAC
JVC A40 Turntable with AT95e + Schiit Mani Preamp
Klipsch KLF-20


Offline galyons

  • Sr. Member
  • ****
    • Posts: 626
  • Geary Lyons
Reply #3 on: February 13, 2015, 10:15:52 AM
There are several good high end switches.  Elna, Goldpoint, & Grayhill have all been used extensively in quality audio. I have Grayhill's in all of my BH kit that switches.  Just be sure to get a switch that maintains the switching of both the signal and the ground. That is the superior topology and the way that the Stereomour is wired with the stock switch.

Cheers,
Geary

VPI TNT IV/JMW 3D 12+Benz LP-S>  Eros + Auralic Aries + ANK Dac 4.1 >Eros TH+ Otari MX5050 IIIB2 > BeePre >Paramount 300B 7N7 > EV Sentry IV-A

Thorens TD124/Ortofon RMG-212/SPU >Seduction > Smash^Up> Paramour 45 MQ >K12's


Offline Natural Sound

  • Sr. Member
  • ****
    • Posts: 998
Reply #4 on: February 13, 2015, 10:24:06 AM
Thanks for the suggestion.  Is the switch shorting or non-shorting?

I'm not 100% sure but I think its shorting.



Offline Natural Sound

  • Sr. Member
  • ****
    • Posts: 998
Reply #5 on: February 13, 2015, 11:33:42 AM
There are several good high end switches.  Elna, Goldpoint, & Grayhill have all been used extensively in quality audio. I have Grayhill's in all of my BH kit that switches.  Just be sure to get a switch that maintains the switching of both the signal and the ground. That is the superior topology and the way that the Stereomour is wired with the stock switch.

Cheers,
Geary

Do you remember what Grayhill models you used?



Offline galyons

  • Sr. Member
  • ****
    • Posts: 626
  • Geary Lyons
Reply #6 on: February 13, 2015, 11:52:22 AM
It is:
GRAYHILL 44HS30-01-4-03N MIL SPEC
 
Number of Positions: 3   
Number of Decks: 1       
Number of Poles per Deck: 4   
Current Rating:      1 A   
Voltage Rating:      115 VAC, 28 VDC
Index Angle:          30 deg       
Contact Style:        Non-Shorting       
Termination Style: Solder Lug 
Mounting Type:     Panel         
Contact Plating:     Silver         
Actuator:      Flat   

http://www.mouser.com/ProductDetail/Grayhill/44HS30-01-4-03N/?qs=ls7QRyWmRk4H00XMNGdLbA==

Cheers,
Geary



VPI TNT IV/JMW 3D 12+Benz LP-S>  Eros + Auralic Aries + ANK Dac 4.1 >Eros TH+ Otari MX5050 IIIB2 > BeePre >Paramount 300B 7N7 > EV Sentry IV-A

Thorens TD124/Ortofon RMG-212/SPU >Seduction > Smash^Up> Paramour 45 MQ >K12's