only left channel work

jazzfan78 · 1429

0 Members and 1 Guest are viewing this topic.

Offline jazzfan78

  • Jr. Member
  • **
    • Posts: 31
on: August 19, 2015, 08:12:35 AM
hello i have problem with my crack.
i plug my hd800 and i hear only in left side, right channel no sound.
i been in friend house to check the hd800 with other amp to see if they are working fine. hd800 work with both sides.
i plugged other cheap headphone again only left side work.
i replaced big tube in crack from stock tube to SYLVANIA TUBE 6080WA but still no sound from right side.

here is my voltages check:

Terminal           Voltage                My Result
----------          ----------                -------------
1                        75-90                    147
2                          170                     199
3                           0                         0           
4                          170                     197
5                         75-90                    99
6                            0                        0                       
7                           100                    164
8                            0                        0
9                           100                     133
10                           0                        0       
11                           0                        0
12                           0                        0
13                          170                     198
14                           0                         0
15                          185                      205
20                            0                         0
21                           206                      212


should i replace the small tube as well?
or maybe i should buy a new RCA plugs or the problem is maybe the washers or something?



Offline jazzfan78

  • Jr. Member
  • **
    • Posts: 31
Reply #1 on: August 20, 2015, 06:10:04 AM
?



Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #2 on: August 20, 2015, 07:11:56 AM
You have a bad solder joint somewhere in the signal path. Check your resistances again, you may find a discrepancy. It is also usually more expedient to simply resolder everything than try to figure out where the fault is.

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19587
Reply #3 on: August 23, 2015, 11:08:26 AM
Do both halves of your 12AU7 glow?

Do both LED's on the 9 pin socket glow?

Please refrain from plugging in your headphones till your voltage at terminal 1 is resolved.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man