Crack w/Speedball LED issue [resolved]

ZestyLemon · 1220

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline ZestyLemon

  • Newbie
  • *
    • Posts: 2
on: November 01, 2015, 04:14:52 AM
I am having an issue with the 2 LEDs on the bottom left of the big PCB not lighting up, the voltage checks come out correct (+/- 15%) and sound comes out. I have checked all the connections on the PCB and reflowed them but that hasn't helped. Any advice?
« Last Edit: November 01, 2015, 10:41:12 AM by Caucasian Blackplate »


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19629
Reply #1 on: November 01, 2015, 06:12:54 AM
If the voltages at 7 and 9 are correct, the LED's on the big board should be lighting up.  What voltages do you have at 7 and 9?

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline ZestyLemon

  • Newbie
  • *
    • Posts: 2
Reply #2 on: November 01, 2015, 09:00:49 AM
It turns out I had the cable from 9L going the the wrong side of the board, swapped it over to the O in the opposite corner and powered it on and the 2 LEDs powered on. The amp sounds so much better now. Thanks for your help!


Pages: 1   Go Up
« previous next »