Crack Manual Question

scotth · 1447

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline scotth

  • Jr. Member
  • **
    • Posts: 15
on: July 17, 2016, 10:04:44 AM
I am currently building the Crack and was a little confused about something. Under "Heater Wiring" it says to attach but not solder B8L and B7L but never goes back and tells you to solder them that I can see. The next step is soldering B8U and B7U, am I supposed to solder B8L and B7L at the same time? Am I missing something? Thanks.


Offline scotth

  • Jr. Member
  • **
    • Posts: 15
Reply #1 on: July 18, 2016, 08:05:54 AM
I got to the end and didn't see any other directions for those terminals, so I just soldered them then. Everything measured right and worked the first time without any issues. Must be beginner's luck.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19766
Reply #2 on: July 24, 2016, 05:36:16 AM
Yes, you can just solder B7 and B8 when the second set of wires is attached.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »