Eros Build - Resistor question

amritdesai · 1826

0 Members and 1 Guest are viewing this topic.

Offline amritdesai

  • Full Member
  • ***
    • Posts: 57
on: September 22, 2016, 06:55:00 AM
I seem to be missing two 470k ohm resistors in my kit (4703F). I am on page 67 of the manual and I have two remaining resistors left - Green, purple, black, orange, brown that are not measuring 470k ohm (see below). Also, I do not see these on the list of parts.

I just wanted to verify these are the incorrect parts before I bug Eileen? Can I go with something with a different value?

Thank you!


Zu Audio soul Mk II, w radian 475
Zu Mission Cables
Stereomour II, JJ 2a3 40
Clearaudio Concept Wood Ortofon Black
Eros Phono Pre
Schiit Bifrost DAC
Synergistic Research Black Fuses


Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #1 on: September 22, 2016, 07:01:28 AM
0.474MΩ = 474KΩ

AND
470 x 1% = 4.70
SO
470±1% = 465.3 - 474.7

THEREFORE a resistor that measures 0.474MΩ is a 470KΩ with 1% accuracy.

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus


Offline amritdesai

  • Full Member
  • ***
    • Posts: 57
Reply #2 on: September 22, 2016, 07:12:37 AM
 :-\

Awesome. That's why I asked!

Thank you Josh!

Zu Audio soul Mk II, w radian 475
Zu Mission Cables
Stereomour II, JJ 2a3 40
Clearaudio Concept Wood Ortofon Black
Eros Phono Pre
Schiit Bifrost DAC
Synergistic Research Black Fuses


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9657
    • Bottlehead
Reply #3 on: September 22, 2016, 07:55:09 AM
The first stripe is yellow, not green. Yellow is 4.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline Rocketman248

  • Full Member
  • ***
    • Posts: 156
Reply #4 on: September 22, 2016, 01:50:27 PM
lol I went through the same thing during my Eros build.  I had to go through the parts list about 3 times before I got everything sorted.  Then, I still messed it up by putting a 47k resistor in a 470k spot.  Too many 47s  :o

Nick DeBrita
Yokosuka, Japan