Kaiju Channel stops working momentarily

[hbonilla]

I just finished upgrading my Kaiju with the DC filament supply and it sounds awesome. However after a few minutes of playing, maybe 5 or 10, the left channel stops working. So I tried turning it on and off and evrytime I do so the channel works again. Has anyone had the same issue?

Thanks

[Paul Birkeland]

You'll want to get a voltage check in when that channel has dropped.

-PB

[Doc B.]

Are you waiting after you turn it off, as in long enough for something to cool down? Or do you just switch off/switch on and it comes back? The latter would be more likely to be a bad solder joint. The former might be a not-optimal heat sink mounting.

[hbonilla]

Yes it is actually the latter. A quick turn off and on will bring the channel back alive.

However, I let it rest through the night and have listened to it for three hours today and everything seems to be ok.

I will keep you posted.

Thanks
H

[Doc B.]

OK, if it happens again I would first swap tubes from side to side and see if it follows one. If it stays in the same channel after the tube swap I would next look for a cold solder joint that might be expanding and losing contact when things get warmed up.