resistance check - terminal 9

[kvh]

probably foolish question.. resistance reading at 6 9 (nine) is not fluctuation, just showing around 1.6R.. voltage readings seem ok.. i don't have a turntable setup at the moment, just going through this and checking it again after it's been unused for a while.

thanks,
mk

[Grainger49]

T6 is the top, +, of the heater supply.  If the reading is steady the capacitor is charged. 

Are you reading 1.6 ohms to ground?  You should have a high reading to ground unless the tubes are in.  The resistance readings are with the tubes removed.

[kvh]

hi,

my brain isn't working today.. i mean terminal 9, not 6. thank you for the speedy response.

[Grainger49]

T9 and T6 are virtually the same spot.  What I said applies.

[kvh]

Thanks... I was getting weird readings w/ my meter... replaced batteries and everything checked out ok.

appreciate the help,
matt

[Grainger49]

Time for tunes now!