Power on pop/crack

rockdrummer · 1222

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline rockdrummer

  • Full Member
  • ***
    • Posts: 103
on: May 28, 2017, 05:41:16 AM
Hi everyone. I am running a freshly finished stereomour. It sounds amazing. I use subs and without a separate preamp, I control 2 volumes, one for subs and one for the mains. I built a quickie to control volume for both. I split the signal from the quickie to stereomour and sub amps.

I can't turn on the quickie without a terribly loud popping sound. I have no idea what to do. Isn't the order going on as preamp, then amp? I tried it the other way and the pop still happens when the quickie turns on.

Thanks
Ben


Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #1 on: May 28, 2017, 07:25:37 AM
Are your subs off when you turn on the Quickie?
« Last Edit: May 28, 2017, 07:31:23 AM by fullheadofnothing »

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus

Offline rockdrummer

  • Full Member
  • ***
    • Posts: 103
Reply #2 on: May 28, 2017, 09:11:42 AM
They are on an auto setting.

I switched the quickie out. I will get it back in and try that.

Thanks for the idea.
Ben


Offline rockdrummer

  • Full Member
  • ***
    • Posts: 103
Reply #3 on: June 04, 2017, 02:55:07 AM
I feel dumb. I absentmindedly left out those sub amps. On/off is silent now. Thanks.

Ben


Pages: 1   Go Up
« previous next »