41PL removal-newbie mistake

tipatina · 6101

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline tipatina

  • Jr. Member
  • **
    • Posts: 42
on: July 15, 2018, 10:50:00 AM
I disabled the loctal mechanism as per the manual but when I plugged in the tubes they were loose. So I crimped it a little and tried again and now they are in and locked good. I realize I'll need to be able to remove them some day. Any hints???


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #1 on: July 16, 2018, 06:14:02 AM
You can flip the Smash over and press them out from the bottom side.  I'd worry about this when the tubes actually die, which could be a very long time.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline tipatina

  • Jr. Member
  • **
    • Posts: 42
Reply #2 on: July 16, 2018, 01:05:22 PM
Thanks for the advice. It looks like the 4P1L tubes may be less visible from underneath after Smashup installation but I guess still accessible?


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #3 on: July 16, 2018, 01:36:14 PM
Yes, you may have to unscrew a board.

A tiny flathead screwdriver may be able to pry the tube out as well.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline tipatina

  • Jr. Member
  • **
    • Posts: 42
Reply #4 on: August 23, 2018, 01:12:45 PM
Thanks, that worked


Pages: 1   Go Up
« previous next »