Stock Potentiometer knob

roycruz23 · 1644

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline roycruz23

  • Jr. Member
  • **
    • Posts: 30
on: May 10, 2018, 12:21:12 PM
The stock potentiometer on S.E.X. 3.0 looks cool. I am looking at upgrading it to a Goldpoint attenuator.
Does the stock knob gonna fit into Goldpoint? Any suggestions for a replacement knob? I will appreciate your reply.


Offline Adrian

  • Sr. Member
  • ****
    • Posts: 276
Reply #1 on: May 10, 2018, 11:58:18 PM
Yes, it fits.

I had to notch out an area in the box for the attenuator to fit.

Adrian C.

VPI Prime w/Ortofon Quintet Black MC/Rothwell MCL Lundahl SUT/EROS/Submissive (3 output mod)/Mainline/Crack - Speedball/S.E.X. 2.1 - C4S/S.E.X. 3.0 - C4S/Paramounts - Blumenstein 2.2 Mini-Max w/DOF mod -Senn HD600/Viso HP50/Focal Elear.

Online Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #2 on: May 11, 2018, 04:43:00 AM
Our pots and rotary switch all use a 1/4" shaft (I'm 99% sure on that at least).  The Goldpoints are 6mm.  What this means is that the stock knob will fit on a Goldpoint pot, but a Goldpoint knob won't fit on our parts without being drilled out slightly (1/4" is about 6.3mm).

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline roycruz23

  • Jr. Member
  • **
    • Posts: 30
Reply #3 on: May 12, 2018, 06:34:52 PM
Thank you! you are very helpful. I don't have to buy another knob then.


Pages: 1   Go Up
« previous next »