Weller wst 82 thermo wire stripper

Applemacman · 5154

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Applemacman

  • Jr. Member
  • **
    • Posts: 46
on: March 30, 2021, 09:00:57 AM
Hi,

Seeking help regarding the weller wst 82 thermo wire stripper, does anyone know if this will work with the weller WE1010 work station. If not can someone surgest a two input weller station it will work with.  Thanks


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9658
    • Bottlehead
Reply #1 on: March 30, 2021, 10:16:10 AM
Looks like the minimum requirement is an 80W station. Weller seems to match it up with the WR2 station in their literature.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline Thermioniclife

  • Sr. Member
  • ****
    • Posts: 794
Reply #2 on: March 30, 2021, 10:28:48 AM
YIKES that power supply is expensive.

Lee R.

Offline Applemacman

  • Jr. Member
  • **
    • Posts: 46
Reply #3 on: March 30, 2021, 11:34:55 AM
Yikes it is. That station is 300watts the thermo stripper is 80 watts so my train of thought was as long as the stations is over 80 watts its ok or is that a bad assumption


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9658
    • Bottlehead
Reply #4 on: March 30, 2021, 12:06:40 PM
That's what Weller says, 80W is enough. Suggest you look at their catalog if you haven't.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline Applemacman

  • Jr. Member
  • **
    • Posts: 46
Reply #5 on: March 31, 2021, 10:40:53 AM
Thanks for the help. I think I found one which is 80 watts cheaper than the wr2


Pages: 1   Go Up
« previous next »