Yes they did! All voltages, even the bias. I built another amp that used LEDs for high and low to to help dialing in the bias. Those LEDs made me think that clockwise raised the voltage. I checked the bias voltages before I did the other voltage checks and cranked one pot down. I definitely had other issues like the jumper wire and cleaning up the 12au7 pins may have helped (at the expense of some of those wires, oof).
I’ll post some pics of the exterior and some final voltage numbers tomorrow. Perhaps this may help someone in the future. Thank you so much! I’m so happy right now.
Oh, I just peeked under the chassis and all 8 tube LEDs are lit! I didn’t need to reflow either.
