Balanced/single ended switch

RestoredSparda · 2700

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline RestoredSparda

  • Full Member
  • ***
    • Posts: 84
on: January 08, 2022, 06:13:05 PM
Sorry for all the questions.  :o

Is it possible to miss wire the balanced/unbalanced switch backwards?

I wanted to make sure it's working correctly. Basically when I am using 1/4 jack the amp is much louder when switched to unbalanced (the correct setting). It is quieter when switched to balanced.

When using the balanced XLR connector I notice zero difference in volume when switching between balanced and unbalanced switch.

Thank you!
« Last Edit: January 08, 2022, 06:20:54 PM by RestoredSparda »


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19751
Reply #1 on: January 09, 2022, 06:13:19 AM
What you are describing is normal operation.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline RestoredSparda

  • Full Member
  • ***
    • Posts: 84
Reply #2 on: January 09, 2022, 06:55:21 AM
Cool. Thank you.  I went through the instructions and all looks good.


Pages: 1   Go Up
« previous next »