Voltage Check

Ivan303 · 2059

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Ivan303

  • Full Member
  • ***
    • Posts: 107
on: April 05, 2022, 12:52:26 PM
page 19  Voltage check

183.2 VDC on both pin 1 and 11?

Close enough to approximately 150 V?

Haven't put it back into the system.



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #1 on: April 05, 2022, 12:53:24 PM
Yes, what you don't want to see is something super low compared to the 150V reference.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Ivan303

  • Full Member
  • ***
    • Posts: 107
Reply #2 on: April 05, 2022, 01:05:22 PM
Great.

Have  124V on both plates (6 and 16) and about 12.5VDC on both cathodes so a whopping 112V across the 300B.

Will now listen.

Thanks!!!!!


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #3 on: April 05, 2022, 01:05:56 PM
When you only need to swing a few volts at the plate, not a whole lot of plate voltage is required ;)

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »