BeePre2 Build

Audionut · 6776

« previous next »
Pages: 1 2   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Audionut

  • Jr. Member
  • **
    • Posts: 11
Reply #15 on: July 10, 2022, 04:18:50 AM
Quote from: 2wo on July 09, 2022, 05:24:56 PM
Nice, I like the top plate finish...John

Thank you, John. I decided to polish the aluminum plate to a mirror finish. I was surprised as to how close it looks like chrome. It will look quite nice once the base is finished. I’ll post pics once that is done too.


Offline Karl5150

  • Sr. Member
  • ****
    • Posts: 629
Reply #16 on: July 11, 2022, 08:14:41 AM
Must have taken a fair amount of elbow-grease, nice work. Looking forward to your base upgrade.
Karl

Karl
Downstairs: Planar3>PH-16>Stereomour II>OB Betsy+
Upstairs: RP1>Eros/CD5004>Seductor (2x Monoblocks)>FH3
Office: Modi Uber 2/Sirius>SEX2.1.1>µFonken FF85WK + DC160 subs
BR: FiiO M6>SEX3.0.1>ScanSpeak 10F + TangBand W6 (Mono)/DT770Pro
Garage: X12 streamer>Quicksand>Minimus 77

Offline Audionut

  • Jr. Member
  • **
    • Posts: 11
Reply #17 on: July 11, 2022, 10:08:00 AM
It did indeed, I used an electric drill but also did some of the work by hand. I had to sand the plate smooth first with several steps in grit before getting to the polishing stage. I don’t think I saved any of the before photos, but I do have this after. The holes and slot cuts made for good fun when polishing the plate.


Pages: 1 2   Go Up
« previous next »