Caps upgrade

Alby0521 · 18476

0 Members and 2 Guests are viewing this topic.

Offline Larpy

  • Full Member
  • ***
    • Posts: 230
Reply #15 on: June 20, 2020, 11:57:56 AM
Here's a question: if a cathode bypass capacitor is used to block the AC signal from going to ground (which is my admittedly limited understanding of why they're used), why would changing from an electrolytic to a poly cap make a sonic difference?  The musical signal doesn't actually pass through a cathode bypass cap, right?

Larry


Online Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19764
Reply #16 on: June 20, 2020, 12:25:52 PM
Here's a question: if a cathode bypass capacitor is used to block the AC signal from going to ground
Capacitors are a (relatively) short circuit to AC but do not pass DC current to ground.


Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Alby0521

  • Full Member
  • ***
    • Posts: 101
Reply #17 on: June 22, 2020, 07:22:55 PM
Ordered the Kaiju yesterday, ordered the 100uf caps today:)
I’ll be building it stock, than adding caps in different times. I’ll report back in about 1 or 2 months.

Best

AB



Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9662
    • Bottlehead
Reply #18 on: June 23, 2020, 04:19:39 AM
Thanks for your order!

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline currly30

  • Full Member
  • ***
    • Posts: 84
Reply #19 on: February 18, 2023, 09:37:32 PM
They fit.

I know this is an old topic but is it even possible to install the DC filament with those massive capacitors installed?



Offline Larpy

  • Full Member
  • ***
    • Posts: 230
Reply #20 on: February 19, 2023, 09:08:14 AM
Worked for me.

Larry


Offline currly30

  • Full Member
  • ***
    • Posts: 84
Reply #21 on: February 19, 2023, 12:30:15 PM
Nice, good to know.