Raw B+ voltage

denti alligator · 2380

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline denti alligator

  • Hero Member
  • *****
    • Posts: 1156
on: December 31, 2023, 09:38:55 AM
I just finished this test. I got a reading that started around 320 and went up little by little to around 324, then down a little, then back up. Should I assume everything is ok? (Incoming voltage is 123V)

- Sam

Rega P3-24 (w/AT 150MLX) w/Groovetracer upgrades / Eros II / FLAC >J.River >DSD256 >Gustard X20 / Moreplay > Stereomour II / Klipsch Forte II w/Crites upgrades / C4S S.E.X. 2.0 +Nickel MQ Iron / Speedball Crack / Sennheiser HD600 w/Cardas cable

Offline hmbscott

  • Full Member
  • ***
    • Posts: 124
Reply #1 on: December 31, 2023, 12:36:41 PM
When I built mine it measured about the same, 321 - 324 VDC in my case. I have a similar line voltage; it varies between 120 and 125 VAC. I assumed it was fine and completed the build with no issues.

Scott
[Ortofon 2M Bronze > U-Turn Theory > Eros II] & [iMac via USB > Denafrips Ares 2] >> Moreplay >> Schiit Lokius EQ >> Stereomour II >> Hsu ULS-15 Sub >> homemade DML Speakers
Moreplay 2nd out >> [Crack + Speedball > HD 650]

Offline denti alligator

  • Hero Member
  • *****
    • Posts: 1156
Reply #2 on: December 31, 2023, 06:29:57 PM
Thanks. From other posts here I assume it’s ok. Happy New Year everyone!

- Sam

Rega P3-24 (w/AT 150MLX) w/Groovetracer upgrades / Eros II / FLAC >J.River >DSD256 >Gustard X20 / Moreplay > Stereomour II / Klipsch Forte II w/Crites upgrades / C4S S.E.X. 2.0 +Nickel MQ Iron / Speedball Crack / Sennheiser HD600 w/Cardas cable

Pages: 1   Go Up
« previous next »