Volume sensitivity

joralieu · 7352

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline joralieu

  • Full Member
  • ***
    • Posts: 102
on: June 28, 2024, 05:12:11 PM
 I have a Moreplay and Kaiju connected to Omega SAM speakers. When I play CD's on My Rega CD player the Volume control on the moreplay has very little  range. This with th e trim pots on the Kajui all the up. Is this normal..




Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19744
Reply #1 on: June 28, 2024, 05:20:15 PM
I would triple check that you have the 10K and 100K pots in the Moreplay in the correct places.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5830
Reply #2 on: June 28, 2024, 06:05:48 PM
Assuming you have passed PB's check above, then it is more or less normal with high-efficiency speakers such as the Omega Super Alnico Monitors. That is one of the reasons Kaiju has adjustable sensitivity controls! Just adjust them until the Moreplay control covers an acceptable range for your system.

Paul Joppa

Offline joralieu

  • Full Member
  • ***
    • Posts: 102
Reply #3 on: June 30, 2024, 04:28:04 PM
How do I triple check this they look identical, how do I measure them?

.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19744
Reply #4 on: June 30, 2024, 04:43:23 PM
Measure resistance between the top front and top rear lugs on the volume pot.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »