Moreplay Upgrade - Upgrades Caps Resistors?

[hmbscott]

Looking forward to ordering the Moreplay Upgrade Kit when the new stock hits the shelves. I'm interested if there are caps or resistors on the upgrade board that would benefit from upgrading? If so I'll stock up so I'm ready for the upgrade.

Second question regarding placement of the upgrade board in the chassis. My Moreplay will be receiving some huge output coupling caps during the upgrade, Audyn True copper 2.2uf, that will be tough to fit with the standard location of the upgrade board. Is the any cautions I should observe if I relocate the board?  I'm currently leaning towards mounting it over the in/out RCA jacks, because my chassis plate is 10X10 so I have quite a bit of real estate in that area.

[Paul Birkeland]

You will lose the 3 lug strips behind the sockets when you add the upgrade, and those caps can be relocated into the space where those terminal strips currently live (provided the leads are still relatively long).

[hmbscott]

Thanks Paul, I will try that.

I'm also interested if there are caps or resistors on the upgrade board that would benefit from upgrading?

[Paul Birkeland]

I couldn't really think of any off the top of my head.  You could put a nicer 2.2uF cap on there if you'd like. 

[hmbscott]

Thanks Paul. I'll see if I can shoehorn in one of the Audyn Cap Plus's. I'm replacing them with the Audyn True coppers, so they will be surplus.