Suggestions That Won't Cost An Arm Or Leg

Grainger49 · 4622

0 Members and 1 Guest are viewing this topic.

Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
on: April 04, 2013, 01:19:00 PM
I am back at work and want to upgrade the $17 Obbligato Parafeed caps in my Paramours.  I have an iron upgrade and need 10uF@600 or greater volts.

The Clarity MR have been well received.  They are $133 each.  That is steep but I can probably bring my cheap self to do it.

Any other suggestions?



Offline ssssly

  • Sr. Member
  • ****
    • Posts: 386
Reply #1 on: April 04, 2013, 01:45:00 PM
Could go with the Duelund. Bigger than a Coke can and about $650  :D

Seriously, the Mundorf Supremes in that value are around $50 and very good sounding caps. Their silver in oil is also a very nice sounding, bit smoother to my ear, and isn't much more at around $190.

Haven't compared either to the Clarity but would consider either a step up from the Obbligato. Which is a nice sounding cap to begin with.

Enjoy



Offline debk

  • Sr. Member
  • ****
    • Posts: 658
Reply #2 on: April 04, 2013, 01:55:41 PM
Grainger

I really like the Clarity MR. 
I have a pair of the newer Solen Silver capacitor in 10uf I am not using, you can have if you want to try them.  PM off list and I will send them to you if you want them.

Debra

Debra K

Eros 2Phono amp
BeePre2, Psvane ACME 300b
Kaiju, Linlai Elite  300b
Monamour 2a3 amps various tubes
Sota Sapphire, Pete Riggle Woody Tonearm, Kiseki Purpleheart Cartridge
Rega P6 Ania Pro cartridge
Roon Nucleus
MHDT Labs Orchid DAC
Jager speakers


Offline coca

  • Full Member
  • ***
    • Posts: 141
Reply #3 on: April 04, 2013, 02:08:56 PM
Grainger, go to the Parts Connexion sight and on the opening page click on the capacitor shoot-out review when it rolls up. Lots of great information there.

Bernie.



Offline earwaxxer

  • Hero Member
  • *****
    • Posts: 1336
Reply #4 on: April 04, 2013, 03:13:05 PM
Hey Granger - I understand your dilemma - I have some obbligatos just like probably everyone else. I have had them in crossovers etc. ended up taking them out. Not very sophisticated sounding IMO. They supposedly get their films from Germany. I say, cut out the middle man, go with German caps from a company that knows what they are doing - you guessed it - Mundorf. In the 10uf I would go with the Supremes - $50/ each. You can always use them somewhere else (crossover) if they dont fit the electronics bill. If you like the basic sound it will give you a clear upgrade path - hint, hint - silver/oils!

Eric
Emotiva XPA-2, Magnepan MMG (mod), Quickie (mod), JRiver, Wyrd4sound uLink, Schiit Gungnir, JPS Digital power cord, MIT power cord, JPS Labs ultraconductor wire throughout, HSU sub. powered by Crown.


Offline 2wo

  • Hero Member
  • *****
    • Posts: 1261
  • Test
Reply #5 on: April 04, 2013, 03:18:37 PM
Damn, lost my post. Short version, I am in the same boat with my SR-75 rebuild...John

John S.


Offline Alonzo

  • Sr. Member
  • ****
    • Posts: 461
  • Not all those who wander are lost
Reply #6 on: April 04, 2013, 04:31:37 PM
How about just bypassing the oilers with a 1 uf Mundorf evo silver/gold and oil?  Also the 1uf Supreme would be good.  I have supremes bypasses in my 45 amp that has obligatto golds and evo bypasses in my 2a3 amp (with obligatto oilers) I like what the obliggatos do and the supposedly higher quality bypasses just add to the goodness.

Alonzo
Gameroom:>Mainline to HD820, SR45 to Pipette
>BeePree Kaiju & SII to Altec 19 knockoffs
Office:>BH Stat amp to Koss 95x, T20 SET to JBL 4309s
Den:> MorePlay 845 SET to Altec Valencia's


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9659
    • Bottlehead
Reply #7 on: April 04, 2013, 05:52:37 PM
Have you guys listened with and without the bypass? I'm old and rusty math-wise but I think maybe you can do some math that indicates there might be phase differentials between the two caps that could actually make the sound less coherent. Not trying to make a stand, just suggesting we might as a community want to cook up some tests to help determine the validity of paralleled caps of an order of magnitude or more difference in capacitance. I have done some rudimentary listening tests along these lines many years ago that made me shy away from the approach.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline ssssly

  • Sr. Member
  • ****
    • Posts: 386
Reply #8 on: April 04, 2013, 06:34:13 PM
I have never left the bypass caps that I have tried in for very long.

They certainly changed the sound. But to me they seemed to either add or subtract in a very limited frequency range. Like a hump in a poorly designed crossover.

I do know people who love them though. I tend to like very flat response curves though. And many find the sound I prefer to be rather dry (alla AKG 702s).



Offline Alonzo

  • Sr. Member
  • ****
    • Posts: 461
  • Not all those who wander are lost
Reply #9 on: April 04, 2013, 06:37:30 PM
Doc,
I didn't go the math route, I just took some caps that I broke in using Grainger's rapid-fire method and added them.  I liked the way it sounded so I left them in the amps.  Best part about it is that it sounds good for a minimal amount of work and it's cheaper.  It may be placebo but that really doesn't matter if I like the sound...

Alonzo
Gameroom:>Mainline to HD820, SR45 to Pipette
>BeePree Kaiju & SII to Altec 19 knockoffs
Office:>BH Stat amp to Koss 95x, T20 SET to JBL 4309s
Den:> MorePlay 845 SET to Altec Valencia's


Offline earwaxxer

  • Hero Member
  • *****
    • Posts: 1336
Reply #10 on: April 04, 2013, 06:37:42 PM
From what I can gather, in the world of audiophiledome, cap bypassing is still in the realm of 'alchemy' compared to other more established disciplines such as power supplies, output stages etc. I have dallied in it a tad with my speaker crossovers. I tried bypassing three different brands of large caps with a small value Mundorf silver/oil and the only one that sounded better (actually much better) was a paper/oil. It was trial/error. It seems what most people do is buy a .01uf ultra expensive cap - ex. CuTF V-cap - use it as a bypass and hope for the best. Of course the reviews are most always 'glowing'. I remain a skeptic. 

Eric
Emotiva XPA-2, Magnepan MMG (mod), Quickie (mod), JRiver, Wyrd4sound uLink, Schiit Gungnir, JPS Digital power cord, MIT power cord, JPS Labs ultraconductor wire throughout, HSU sub. powered by Crown.


Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #11 on: April 06, 2013, 02:45:17 AM
Ok, I