Soldering temp

mkane · 3599

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline mkane

  • Full Member
  • ***
    • Posts: 195
on: February 05, 2015, 05:29:50 AM
  Just bought a Hakko. Need advise on temperature setting. Default setting is 750 f. Seems hot.


Offline mcandmar

  • Hero Member
  • *****
    • Posts: 1599
  • Not all engineers are civil
Reply #1 on: February 05, 2015, 05:48:12 AM
Sounds a bit, i have the default temp on mine set to 350c, sometimes i bump upto 400c if there is a large heatsink soaking up the heat.  Think that translates to around 650f and 750f.

M.McCandless

Offline mkane

  • Full Member
  • ***
    • Posts: 195
Reply #2 on: February 05, 2015, 06:45:32 AM
Thank you.


Online Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
Reply #3 on: February 05, 2015, 07:19:37 AM
In the office, we solder with the temperature all the way up.

(For soldering LED's, having the temp this high means you need just a second or two of iron contact)

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline mkane

  • Full Member
  • ***
    • Posts: 195
Reply #4 on: February 05, 2015, 08:00:41 AM
  thx again


Pages: 1   Go Up
« previous next »