Well, I finished my Crack that I got for Christmas. It was extremely fun to build and I had no issues whatsoever. I finished it this morning, and went to test with my junky headphones, and I didn't get sound in the Right channel. Sound in the left was normal, gain worked, pot worked, etc. There was a slight hum in the Right channel, and no music. So I tested the voltages as per the manual...
B1, A6, and Terminal 1, all measured ≈ 59.6v. There may have been one more terminal near the transformer measuring the same, but I can't recall. Both LEDS work, as the sound in the left channel works fine. If you guys could point me in the right direction, it would be great, thanks!
Nevermind, I'm a dumbass. I forgot to solder from A7 to the Pot... Idiot. Problem solved.
