hi again thanks for your help. i have the following readings on my voltage check that differ from those in the manual.
10 190.4v
15 190v
22 217.5v
25 217.4v
40 217.1v
43 217v
46 217v
i assume this falls with in the acceptable range.
i am reading the "manual typos" section at the beginning of the posts as A2 and A3 as well as B2 and B3 are flipped.
my readings were
A2 101v
A3 0v
B2 97.3v
B3 0v
C3 4.83v (slightly out side the range in the manual)
is this okay.
