Starting questions

glynnw · 4928

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline glynnw

  • Full Member
  • ***
    • Posts: 162
on: November 13, 2015, 07:19:56 AM
Just got the kit today.  Top plate looks great!!

3. questions:

1.  How do I download the manual?  Where is it on the site?

2.  As an upgrade to the 630V Solen, will a 600V cap work?

3.  Do I still have to really clean the top plate before clearcoating it?

There will no doubt be more questions - been a few years since I built one of these.

PC, J River software, opticaRendu, Schitt Ygg DAC,Tortuga Pre, Torta Radu tube buffer, Linear Tube Audio ZOTL10, Spatial Audio X5w/pair of GR Research dual 12" open baffle servo subwoofers tamed by DSpeaker Dual-Core DSP , Audience AU24 SE  spkr cable, handmade silver interconnects,

Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #1 on: November 13, 2015, 07:44:13 AM
1. Either from the link in the order e-mail or by logging in to your shopping cart account.

2. Probably.

3. I'm not sure how many people have clearcoated the brushed finish. It may end up looking kind of odd either way, but cleaning first is definitely a good idea.
« Last Edit: November 13, 2015, 07:46:50 AM by fullheadofnothing »

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #2 on: November 23, 2015, 12:52:39 PM
Hello Glynn,

I would strongly recommend cleaning the top plate with acetone if possible, while wearing gloves of course.

The gloves will keep the acetone off your hands, and the oil from your hands off the plate.

Some clear coats will tolerate oils, others will fish eye around the spot. 

If you're going to paint or powder coat the panel with a solid color, I would just sand it with some 400 grit paper, then clean and call it good.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »