Just scored

proud indian · 25435

« previous next »
Pages: 1 2   Go Down

0 Members and 2 Guests are viewing this topic.

Offline proud indian

  • Full Member
  • ***
    • Posts: 159
Reply #15 on: January 14, 2016, 03:40:21 AM
One last one..... how many hours for break in.

Thanksm

Shreekant

system 1. oppo, quickie,SEX 2.1 ( V cap), Decware DFR8 in ZOB cabs
System 2. Tascam cd200, Terra Dac,Zbox,Decware Zen amp(V cap) Lowther PM6A in Acousta horns.
Maple rack, Brass footers,Power conditioner, dedicated treated room, iso pads, plenty of tubes. All cables DIY.

Offline Natural Sound

  • Sr. Member
  • ****
    • Posts: 998
Reply #16 on: January 14, 2016, 05:11:17 AM
Quote from: proud indian on January 14, 2016, 03:40:21 AM
One last one..... how many hours for break in.

Thanksm

Shreekant

There are lots of opinions on break in time. General rule of thumb is 50 to 100 hours. On a FPIII that's mainly for the tubes and caps. Enjoy! The FPIII is a great pre-amp. I have two of them.


Offline proud indian

  • Full Member
  • ***
    • Posts: 159
Reply #17 on: January 14, 2016, 05:50:50 AM
Thanks boss.....Keb Mo playing at present.


Shreekant

system 1. oppo, quickie,SEX 2.1 ( V cap), Decware DFR8 in ZOB cabs
System 2. Tascam cd200, Terra Dac,Zbox,Decware Zen amp(V cap) Lowther PM6A in Acousta horns.
Maple rack, Brass footers,Power conditioner, dedicated treated room, iso pads, plenty of tubes. All cables DIY.

Offline proud indian

  • Full Member
  • ***
    • Posts: 159
Reply #18 on: March 27, 2016, 08:13:36 AM
A question for better understanding.

The 2nd output ie R02  and L02 have a 1K resistor.  It is also mentioned that it is to be used for  the sub. What actually happens for it to be certified as a sub out, rather than just another output. Any reason? So can be used as another output and can it interchanged.

Shreekant

system 1. oppo, quickie,SEX 2.1 ( V cap), Decware DFR8 in ZOB cabs
System 2. Tascam cd200, Terra Dac,Zbox,Decware Zen amp(V cap) Lowther PM6A in Acousta horns.
Maple rack, Brass footers,Power conditioner, dedicated treated room, iso pads, plenty of tubes. All cables DIY.

Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5847
Reply #19 on: March 27, 2016, 04:20:28 PM
The added resistance increases the possibility of treble loss due to the cable capacitance. In most cases you won't hear any difference unless the output cables are very long.

Paul Joppa

Offline proud indian

  • Full Member
  • ***
    • Posts: 159
Reply #20 on: March 28, 2016, 04:45:59 AM
Thought as much, but just needed clarity. Thanks PJ.

Shreekant

system 1. oppo, quickie,SEX 2.1 ( V cap), Decware DFR8 in ZOB cabs
System 2. Tascam cd200, Terra Dac,Zbox,Decware Zen amp(V cap) Lowther PM6A in Acousta horns.
Maple rack, Brass footers,Power conditioner, dedicated treated room, iso pads, plenty of tubes. All cables DIY.

Pages: 1 2   Go Up
« previous next »