Help with new build!! [resolved]

adeep42 · 1909

0 Members and 1 Guest are viewing this topic.

Offline adeep42

  • Full Member
  • ***
    • Posts: 212
on: June 02, 2016, 04:08:06 PM
Just finished basic Crack. Resistance checks were perfect. Went to do voltage checks and Fuse blew. Can't find a wiring problem. Any thoughts, please. Also, must get new fuse. Parts list says 0.5A. Is it slow blow or fast blow? Can I use a different fuse. Thanks all. Was really hoping to listen tonight, but I guess I'll have to wait.
« Last Edit: June 05, 2016, 08:02:05 AM by Caucasian Blackplate »



Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #1 on: June 03, 2016, 03:28:16 AM
1A fast or slow. Check orientation of all caps and UF4007s.

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus


Offline adeep42

  • Full Member
  • ***
    • Posts: 212
Reply #2 on: June 03, 2016, 09:55:55 AM
Thank you so much Josh. I blew the orientation on the last UF4007. Now have a beautifully functioning CRACK. Sounds great, looks great. Will revel in it till I get the urge to install the Speedball I purchased along with it.

Will post some pictures in the gallery a little later.



Offline adeep42

  • Full Member
  • ***
    • Posts: 212
Reply #3 on: June 22, 2016, 10:58:03 AM
Triumph. Speedball installed. Wow!!!!!!!!!!!!!!!!!!!!

Thank you Doc and all the Bottlehead crew. I couldn't be happier. Am now considering Eros.



Offline Rocketman248

  • Full Member
  • ***
    • Posts: 156
Reply #4 on: June 22, 2016, 11:23:03 PM
Go for it!  The Eros took my vinyl setup to a completely new level.

Nick DeBrita
Yokosuka, Japan