Crack + Speedball built

larrburd · 3853

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline larrburd

  • Newbie
  • *
    • Posts: 4
on: February 23, 2012, 08:44:35 AM
Just finished assembling the Crack Headphone Amp + Speedball.
The voltage readings on terminal 20 = 0. Speedball manual says it should be 206.
Reading on 19 = 91.8.  Should be 0.

Keep in mind I followed the revision 5/6/10 on page 19 of Crack manual: connecting transformer terminal 4 to 14U instead of 22L.

I'm unable to locate anything wrong with the build. Maybe I fried 1 of the resistors? on the IC boards.
Any help would be appreciated.


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9662
    • Bottlehead
Reply #1 on: February 23, 2012, 11:20:12 AM
Did you assemble the Crack with the Speedball all at once?

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline larrburd

  • Newbie
  • *
    • Posts: 4
Reply #2 on: February 23, 2012, 12:33:56 PM
Yes, I built it all at once.  I just read the advise about building the Crack kit completely and then installing the Speedball.

By the way, I've been listening to the Headphone Amp like it is and it sound pretty darn good.

Should I uninstall the Speedball and complete just the Crack?


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9662
    • Bottlehead
Reply #3 on: February 23, 2012, 01:16:27 PM

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline Laudanum

  • Sr. Member
  • ****
    • Posts: 916
Reply #4 on: February 23, 2012, 01:19:38 PM
Doc beat me to it.

Desmond G.

Offline larrburd

  • Newbie
  • *
    • Posts: 4
Reply #5 on: February 23, 2012, 01:26:53 PM
The effort is appreciated.:)


Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #6 on: February 23, 2012, 01:31:43 PM
Somewhere we should have this advice:

Before assembling a kit check for updates, corrections etc. in the kit's area.


Offline larrburd

  • Newbie
  • *
    • Posts: 4
Reply #7 on: February 23, 2012, 01:36:13 PM
Yes, or maybe add it to the CD, just so a person can get headed in the right direction.


Offline networkn

  • Full Member
  • ***
    • Posts: 72
Reply #8 on: August 21, 2016, 12:20:59 PM
I actually think all the new manuals should go out with a link at the top which takes you to the latest updates on the forums for example.


Pages: 1   Go Up
« previous next »