Final Voltage check Questions [resolved]

Why1504 · 1813

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Why1504

  • Full Member
  • ***
    • Posts: 60
on: January 25, 2017, 04:23:09 AM
All of my readings were within 10% except the following.


TS   Expected     Actual
2        71K            84.3K
4        60K            73.8K
12      60K            74.1K
14      71K            84.6K


 Please advise on how I should proceed.

EDIT:  I have now reflowed ever terminal strip.  No change.

THANKS!!
« Last Edit: January 26, 2017, 01:06:25 PM by Caucasian Blackplate »


Offline Why1504

  • Full Member
  • ***
    • Posts: 60
Reply #1 on: January 25, 2017, 10:27:43 AM
OK, I looked forward thru the form and saw where another got similar readings and that it was OK. 

I proceeded to check the resistance for the sockets. I had some readings there that were also high which I also assume are good.  However pin 4 on scokets A, B, and C all return a value of .621K

I think this is a problem.  Can someone in the know please advise.


Offline Why1504

  • Full Member
  • ***
    • Posts: 60
Reply #2 on: January 25, 2017, 11:00:47 AM
OK,

I re-read this post:
http://bottlehead.com/smf/index.php?topic=8858.0

He had the same reading so I proceeded to the Voltage Check.

Everything was within a few volts except OB on one board (100vdc expected)  I got 45.6vdc

Please advise.


Offline Why1504

  • Full Member
  • ***
    • Posts: 60
Reply #3 on: January 25, 2017, 11:26:10 AM
I just re-flowed all of the connections on the card in question.  No change.


Offline Why1504

  • Full Member
  • ***
    • Posts: 60
Reply #4 on: January 25, 2017, 12:19:17 PM
FIXED!!

All the voltages are a bit low but close.  About to make some music!!


Offline Why1504

  • Full Member
  • ***
    • Posts: 60
Reply #5 on: January 25, 2017, 12:57:30 PM
Sound is nothing short of breathtaking.


Pages: 1   Go Up
« previous next »