Blown left channel...

StivVid · 2440

« previous next »
Pages: 1 2   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
Reply #15 on: November 08, 2017, 05:45:09 PM
What's the voltage across the 1.27K resistor on that channel?

Often times we see high voltage at the output of the C4S when the center leg of the MJE5731A isn't adequately soldered.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline StivVid

  • Full Member
  • ***
    • Posts: 67
Reply #16 on: November 08, 2017, 06:40:24 PM
Everything else checked out, so I decided to replace the LEDs with some spares that I had on hand.  That did it. We're up and running again. Thanks again for all your help. Much appreciated.


Pages: 1 2   Go Up
« previous next »