Here’s a picture with the Cree diodes attached.
So I can replace the 2.2 film and 250V 2.2uF with 100uF film that are identical to the two Daytons I’ve already installed?
If I wanted to “bypass†the existing Daytons I have, do I take one of the wires from the Dayton and connect it to another cap, then from that cap continue it on to either 6U or 7U? I’ve been looking at pictures people have posted, but it’s difficult to see where the wires lead. So when you say you’re double bypassing, you’re adding another cap to the chain? I feel like I’m answering my own questions.
You said that you chose to bypass the 2nd and last PS cap, so you left the existing caps in?
I’m not sure what is meant by bypassing. Also going to search and read about the difference between film, silver/oil, and Teflon caps.
I’ve also installed the choke. I’ll post a picture of it later. It’s sounding great!