News: Trouble logging in? Log in from the login page.
December 12, 2019, 06:08:19 AM

Author Topic: Error in Shunt Regulator Manual  (Read 209 times)

0 Members and 1 Guest are viewing this topic.

Offline Deke609

  • Sr. Member
  • ****
  • Posts: 789
Error in Shunt Regulator Manual
« on: September 22, 2018, 04:03:05 AM »
Hi Joshua -

I think a found a typo in the SII manual.

The third step on page 20 reads "Attach and solder the red wire connected to IA on the Shunt Regulator board to 34U."

I think that should be "Attach and solder the red wire connected to IB on the Shunt Regulator board to 34U."

The accompanying picture shows the wire connected to IB going to 34U.  I followed the picture, as I expect most people will, because by the time you reach page 20 you've already soldered IA to 27U as per the instructions on page 19.

cheers,

Derek
Derek
______

Roon Intel NUC ->  Yggdrasil DAC -> BeePre (w/ BeeQuiet and EML 300B)  -> Kaiju (w/ DCFil and EML 300B) or Stereomour II (2A3 [EML Mesh] and 45 Conversion [EML 45B])  -> Audeze LCD4