News: Trouble logging in? Log in from the login page.
August 20, 2019, 11:47:19 AM

Author Topic: [RESOLVED] No sound coming through  (Read 287 times)

0 Members and 1 Guest are viewing this topic.

Offline oguinn

  • Sr. Member
  • ****
  • Posts: 360
    • DIY Audio Gallery
[RESOLVED] No sound coming through
« on: October 16, 2018, 11:24:28 AM »
I just finished my Quicksand and have apparently screwed the pooch somewhere along the way.

I installed the batteries, plugged my iPhone X into the input jacks, turned it all the way up, started music, then plugged in headphones. No sound. Toggled the Quicksand's power switch on and off a few times, no sound. Unplugged the headphones, plugged in speakers. No sound.

I've attached photos of the build, although photos of the underside of the board are difficult to get. Let me know if there's an area I should get clearer photos of.
« Last Edit: October 16, 2018, 12:39:49 PM by oguinn »
Jameson O’Guinn

-

Main System: JDS Labs ODAC, U-Turn Orbit, Reduction with Integration, Smash with Smashup and SmashQuiet (replacing w/ BeePre), Stereomour II with DC Filament and Shunt Regulator (replacing w/ Kaiju), SEX 3.0 with C4S, Blumenstein Orcas, HD6XX

Desktop System: Crack with Speedball

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 11137
Re: No sound coming through
« Reply #1 on: October 16, 2018, 12:13:56 PM »
There's at least one unsoldered joint down there.
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline oguinn

  • Sr. Member
  • ****
  • Posts: 360
    • DIY Audio Gallery
Re: [RESOLVED] No sound coming through
« Reply #2 on: October 16, 2018, 12:40:06 PM »
So embarrassing. That did it.
Jameson O’Guinn

-

Main System: JDS Labs ODAC, U-Turn Orbit, Reduction with Integration, Smash with Smashup and SmashQuiet (replacing w/ BeePre), Stereomour II with DC Filament and Shunt Regulator (replacing w/ Kaiju), SEX 3.0 with C4S, Blumenstein Orcas, HD6XX

Desktop System: Crack with Speedball

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 11137
Re: [RESOLVED] No sound coming through
« Reply #3 on: October 16, 2018, 12:44:50 PM »
I wouldn't be embarrassed at all, there are a zillion joints on the bottom side of that board!
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline oguinn

  • Sr. Member
  • ****
  • Posts: 360
    • DIY Audio Gallery
Re: [RESOLVED] No sound coming through
« Reply #4 on: October 16, 2018, 01:19:26 PM »
There really are! Thanks for the sharp eye, though!
Jameson O’Guinn

-

Main System: JDS Labs ODAC, U-Turn Orbit, Reduction with Integration, Smash with Smashup and SmashQuiet (replacing w/ BeePre), Stereomour II with DC Filament and Shunt Regulator (replacing w/ Kaiju), SEX 3.0 with C4S, Blumenstein Orcas, HD6XX

Desktop System: Crack with Speedball