Mislabeled PT-8 transformer?

Warmaster Horus · 1661

0 Members and 3 Guests are viewing this topic.

Offline Warmaster Horus

  • Newbie
  • *
    • Posts: 4
on: January 29, 2020, 12:08:37 PM
Hello!
I am building a crack-a-2-a, my 2nd BH kit (did a crack + speedball a few years ago).

I'm at the step to wire up the power transformer (after checking mains voltage), and while i followed the label on the transformer when installing it onto the plate, it now looks like the label may be flipped?
(Where pins 1-6 are labeled, there are only 3 terminals, etc).

I have posted a photo of the transformer in my kit:

https://imgur.com/gallery/e6s4Hf7 [nofollow]

It looks like the label is just upside down, but can anyone take a look and confirm that it looks correct otherwise?
(Just want a 2nd set of eyes/opinion before i proceed..)

Thank you!



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19621
Reply #1 on: January 29, 2020, 12:13:50 PM
Yes, the sticker needs to be flipped around. (the transformer does too)
« Last Edit: January 29, 2020, 02:52:56 PM by Paul Birkeland »

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man