Ping PB

Thermioniclife · 564

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Online Thermioniclife

  • Sr. Member
  • ****
    • Posts: 758
on: January 24, 2020, 08:23:40 AM
Hey Paul,
Do you see any problem using a switch to select between the C4s and the original 150k Ohm plate load resistors while the amp is running?
Can that hurt the transistors on the C4s?
Thanks in advance,
Lee

Lee R.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19365
Reply #1 on: January 24, 2020, 12:45:06 PM
I would put the switch inside the amp so you have to power it down and flip it over to throw the switch. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Online Thermioniclife

  • Sr. Member
  • ****
    • Posts: 758
Reply #2 on: January 24, 2020, 01:17:18 PM
So no hot swapping, I kinda wanted an instant A/B switch.

Lee R.

Online Thermioniclife

  • Sr. Member
  • ****
    • Posts: 758
Reply #3 on: January 24, 2020, 01:21:12 PM
I can see the problem with arcing on the switch contacts.

Lee R.

Pages: 1   Go Up
« previous next »