Eros 2 Output Caps Typo?

MisterM · 615

0 Members and 1 Guest are viewing this topic.

Offline MisterM

  • Jr. Member
  • **
    • Posts: 31
on: March 18, 2020, 11:10:20 AM
The EROS 2 Schematic shows the output caps to be 1.0 uf, 400V. But the parts list shows no 1.0 uf caps and list 2 - 0.1 uf, 400V. caps. Do we have a wandering decimal? Which is right?

Frank Horvatich


Offline grufti

  • Sr. Member
  • ****
    • Posts: 320
Reply #1 on: March 18, 2020, 12:00:37 PM
1.0μF is correct. The parts list has a few typos, if I remember correctly.



Offline oguinn

  • Sr. Member
  • ****
    • Posts: 895
Reply #2 on: March 18, 2020, 12:07:59 PM

Jameson O'Guinn

-

Main System: Schiit Bifrost MB, Rega Planar 6 with Exact cartridge, Eros 2, BeePre, Kaiju/Stereomour II, Jagers, Mainline

Desktop System: Crack with Speedball


Offline grufti

  • Sr. Member
  • ****
    • Posts: 320
Reply #3 on: March 18, 2020, 12:49:20 PM
You can search for my posts with the word Eros in them. Display those as messages. I believe I found two or three more: one related to the Zener diode, another one about the circuit diagram. I have no clue, if any of those have been fixed in the meantime.



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19319
Reply #4 on: March 18, 2020, 01:08:16 PM
The EROS 2 Schematic shows the output caps to be 1.0 uf, 400V. But the parts list shows no 1.0 uf caps and list 2 - 0.1 uf, 400V. caps. Do we have a wandering decimal? Which is right?
I would guess that you purchased this kit before October of 2019, as that omission has been corrected.

The schematic, the parts provided with your kit, and the instructions in the manual will all call for the 1.5uF Solen caps.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline MisterM

  • Jr. Member
  • **
    • Posts: 31
Reply #5 on: March 18, 2020, 02:14:56 PM
Actually I just submitted my order today and downloaded the manual this afternoon. I also noticed the Solen 1.5 uf, 630 V. caps on page 73 in the picture of the finished amp.

Frank Horvatich


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9540
    • Bottlehead
Reply #6 on: March 18, 2020, 02:47:15 PM
Thanks for your order, Frank!

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19319
Reply #7 on: March 18, 2020, 03:24:46 PM
These are the output coupling caps.  The 1uF cap was a part we carried for an older version of the SEX amp, and when the newer version of the kit went to 1.5uF, we included that part in the Eros as well.  Anything from 1uF to 3.3uF in that position works quite nicely.


Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man