Switch confusion

vetmed · 1118

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline vetmed

  • Full Member
  • ***
    • Posts: 245
on: June 18, 2020, 03:21:00 AM
I am working on a preamp project and have decided that I only need 2 inputs. The Quickie used a switch to toggle between 2 inputs. When I look at the Mouser site I find it to be totally confusing, can someone suggest an appropriate part? Thanks

Robert Lees

Robert Lees

Offline bernieclub

  • Full Member
  • ***
    • Posts: 114
Reply #1 on: June 18, 2020, 03:50:23 AM
Probably double pole, double throw.   Search for DPDT schematic

Bernie Zitomer

Offline bernieclub

  • Full Member
  • ***
    • Posts: 114
Reply #2 on: June 18, 2020, 04:01:21 AM

Bernie Zitomer

Online Thermioniclife

  • Sr. Member
  • ****
    • Posts: 794
Reply #3 on: June 18, 2020, 04:43:59 AM
I would recommend a 4 pole double throw, That way you can switch both the signal and the signal grounds to avoid ground loops. Just sayin.

Lee R.

Offline bernieclub

  • Full Member
  • ***
    • Posts: 114
Reply #4 on: June 18, 2020, 04:57:37 AM
Yup

Bernie Zitomer

Online Thermioniclife

  • Sr. Member
  • ****
    • Posts: 794
Reply #5 on: June 18, 2020, 05:29:23 AM

Lee R.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #6 on: June 18, 2020, 05:46:36 AM
Yeah, I bet there are 5000 switches listed. 

It's really easy to get something that won't work.  Watch out for momentary switches, which means they won't stay flipped when you actuate them.  They will often look like OFF-(ON) in the listing, with the parenthesis indicating a momentary contact, but that's not always in there!

The next pitfall is what kind of terminals the switch has.  You don't want screw terminals or PC pins of any kind, so that's more sorting. 

And lastly actuator length can get you too.  I remember finding the perfect switch, then I got it and the actuator was only 1/4" long!  That reminds me, I need to throw those away...

This is the old gen 1 Quickie input switch: https://www.mouser.com/ProductDetail/Mountain-Switch/108-1MD1T1B1M1QE-EVX/?qs=/ha2pyFaduj44olDx12WvJgKiMMMtIyyIbBEor1SfF6sbsgXKL1CMY2GqkWoVPu9

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Deke609

  • Guest
Reply #7 on: June 18, 2020, 05:47:49 AM
Quote from: Thermioniclife on June 18, 2020, 04:43:59 AM
I would recommend a 4 pole double throw, That way you can switch both the signal and the signal grounds to avoid ground loops. Just sayin.

Lee - can you say more about this? I'm not sure I get it.

Is the purpose to allow only the grounds of the amp and source in use to be connected? If so, wouldn't 3P2T switch work? Preamp ground connected to third pole, with source 1 ground connected to corresponding throw 1 and source 2 ground connected to corresponding throw 2?

Many thanks, Derek


Online Thermioniclife

  • Sr. Member
  • ****
    • Posts: 794
Reply #8 on: June 18, 2020, 07:29:39 AM
Derek I suppose you are correct in that most source equipment has a common audio ground.

Lee R.

Offline vetmed

  • Full Member
  • ***
    • Posts: 245
Reply #9 on: June 18, 2020, 08:01:45 AM
Thanks to everyone that took the time to reply, I think I will go with the Quickie switch. If it works in my Quickie it should work in my new project. Cheers!

Robert Lees

Deke609

  • Guest
Reply #10 on: June 18, 2020, 09:13:36 AM
Quote from: Thermioniclife on June 18, 2020, 07:29:39 AM
... most source equipment has a common audio ground.

Ah, yes, I didn't even think about separate channel grounds.  That makes sense. Thanks Lee.


Pages: 1   Go Up
« previous next »