News:
October 17, 2021, 06:52:55 PM

Author Topic: Battery used in bottlebatt  (Read 979 times)

0 Members and 1 Guest are viewing this topic.

Offline Natural Sound

  • Sr. Member
  • ****
  • Posts: 942
Battery used in bottlebatt
« on: October 26, 2019, 09:37:26 AM »
Can someone tell me what type of Battery was used in the now discontinued BottleBatt?

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 15685
Re: Battery used in bottlebatt
« Reply #1 on: October 26, 2019, 10:05:03 AM »
Here you go:

https://www.cheap-batteries.com/p/SLA7-6.html?Session_ID=0aa5d51d30730543dfe33b49e6ebef69

I just noticed that mine is also going flat, so I'll be ordering one as well.
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline AudioDave

  • Full Member
  • ***
  • Posts: 98
Re: Battery used in bottlebatt
« Reply #2 on: May 09, 2021, 12:15:09 PM »
I also need to order a new battery for my BottleBatt.  How do you open the case to replace the battery?  I don't want to remove any screws I don't have to!
Thanks!
Dave

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 15685
Re: Battery used in bottlebatt
« Reply #3 on: May 09, 2021, 02:27:45 PM »
I would take the front panel off and move it out of the way, then you should be able to slide the cover off.
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline AudioDave

  • Full Member
  • ***
  • Posts: 98
Re: Battery used in bottlebatt
« Reply #4 on: May 09, 2021, 05:33:14 PM »
Thanks Paul!

Offline AudioDave

  • Full Member
  • ***
  • Posts: 98
Re: Battery used in bottlebatt
« Reply #5 on: May 10, 2021, 06:58:05 AM »
One more question,  does the selector switch screw onto the front faceplate or is it a friction fit?  Not sure how to remove it and don't want to damage anything!
Dave

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 15685
Re: Battery used in bottlebatt
« Reply #6 on: May 10, 2021, 07:06:13 AM »
You don't need to remove it.  Just take the screws off and let the plate move out of the way with the selector still attached.
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man