News:
October 17, 2021, 11:36:34 AM

Author Topic: re volume too loud on crack [resolved]  (Read 272 times)

0 Members and 1 Guest are viewing this topic.

Offline ross munro

  • Newbie
  • *
  • Posts: 4
re volume too loud on crack [resolved]
« on: August 25, 2021, 01:30:52 AM »
hi ive checked question no 3 about adding resistors to the red and white leads from phono inputs but not sure where i attach the other resistors is there any photos of this as it would really help me understand exactly where to solder them. im looking at my crack from the phono inputs and is it the right hand two sets of lugs and do i solder up and down or across thanks .regards ross
« Last Edit: August 26, 2021, 05:33:42 AM by Paul Birkeland »

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 15685
Re: re volume too loud on crack
« Reply #1 on: August 25, 2021, 05:03:07 AM »
There's a picture at the bottom of the Crack FAQ first post that shows how these are installed.
https://forum.bottlehead.com/index.php?topic=4295.0
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline ross munro

  • Newbie
  • *
  • Posts: 4
Re: re volume too loud on crack
« Reply #2 on: August 25, 2021, 01:15:05 PM »
thanks paul will let you know how i get on

Offline ross munro

  • Newbie
  • *
  • Posts: 4
Re: re volume too loud on crack
« Reply #3 on: August 26, 2021, 03:08:00 AM »
have done the work on volume pot all is well ,sounds great with more useable volume thanks paul im so enjoying my music best wishes ross